Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in the weeks Weeks 27-29, 2024? Check out new documents from the field of spectroscopy, especially ICP/MS techniques!
<blockquote>
<h4>👉 <a href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT ICPMS AND RELATED TECHNIQUES</a></h4>
</blockquote>
<blockquote>
👉 Need info about different analytical techniques? Peek into <a href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.
</blockquote>
<h4>1. Agilent Technologies: <a href="https://icpms.cz/labrulez-bucket-strapi-h3hsga3/ICP_MS_Intelli_Quant_Analysis_Technical_Overview_f68dc39e11.pdf">Agilent ICP-MS IntelliQuant Analysis</a></h4>
<ul>
<li>Technical Overview: An overview of QuickScan, IntelliQuant, and Star Rating</li>
</ul>
Introduction: Introduced in Agilent ICP-MS MassHunter version 4.6, IntelliQuant for ICP-MS provides an automated semiquantitative analysis for every sample. Calibration and background correction are automatically made with no user intervention, and data is presented in an easily understood periodic table heat map format and a comprehensive data table.
IntelliQuant is possible because a QuickScan can be performed when measuring each sample. The optional two second QuickScan acquires a complete mass spectrum of the entire measurable mass range, facilitating semiquantitative and Total Matrix Solids (TMS) calculations of every sample.
TMS levels are calculated from the IntelliQuant data. Similar to Total Dissolved Solids (TDS), TMS is the sum of the key matrix elements in each sample. Included in the TMS calculation are the elements typically considered to contribute to matrix effects, such as ionization suppression and matrix deposition on interface cones and lenses. Gas elements, including elements in acids such as HCl and HNO₃ , do not cause appreciable matrix effects in ICP-MS, so they are excluded from the calculation.
<h4>2. Agilent Technologies: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_7850_icpms_elemental_impurities_oligo_asms_2024_mp131_en_agilent_e8292cc884.pdf">Analysis of Elemental Impurities in Synthetic Oligonucleotides by ICP-MS In compliance with USP &lt;232&gt;/&lt;233&gt; and ICH Q3D(R2)/Q2(R1)</a></h4>
<ul>
<li>Poster - ASMS 2024</li>
</ul>
Introduction: Synthetic oligonucleotides are short chains (oligomers) of deoxyribonucleic acid (DNA) or ribonucleic acid (RNA) molecules. They are used in applications such as polymerase chain reaction (PCR) tests, DNA sequencing and novel therapeutic products.
The synthesis of oligonucleotides involves a four-step cyclic process followed by multi-step downstream purification. This manufacturing process as well as environment, packaging, and container closure systems can be potential sources of contamination leading to inorganic impurities formation.
To control and monitor product safety, permitted daily exposure (PDE) limits of 24 elements are defined in ICH guideline Q3D(R2)1 and USP chapter &lt;232&gt;2 . ICH Q2(R1)3 and USP&lt;233&gt; 4 describe analytical measurement requirements and procedures for the measurement of those elemental impurities. Although oligonucleotide products have not been included in those regulatory guidelines yet, the industry common practice is to follow those guidelines.
In this study, an analytical workflow (Figure1) was developed in accordance with the ICH/USP guidelines for the analysis of elemental impurities in an oligonucleotide sample using an Agilent 7850 ICP-MS. Data was acquired to evaluate the accuracy, specificity, reproducibility, and ruggedness of the method.
Conclusions: The study has demonstrated the suitability of the Agilent 7850 ICP-MS for the identification and quantification of 24 elements in a synthetic oligonucleotide sample in compliance with existing USP and ICH guidelines. Instrument and method performance requirements for stability, detectability, precision, specificity, ruggedness, accuracy, and spike recovery were all achieved per the criteria given in USP &lt;232&gt;/&lt;233&gt; and ICH Q3D(R2)/Q2(R1).
As the development and use of oligonucleotides in therapeutic applications continue to advance, the elemental impurities analysis of oligonucleotides using 7850 ICP-MS can safeguard the product quality and safety.
<h4>3. Thermo Fisher Scientific: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_002822_tea_icap_rqplus_food_an002822_em_en_7e73327401.pdf">Accurate and reliable multielement analysis of alternative protein foods using ICP-MS</a></h4>
<ul>
<li>Application note - Food safety</li>
</ul>
Goal: To demonstrate the applicability of the Thermo Scientific™ iCAP™ RQplus ICP-MS instrument for fast and accurate, highly sensitive, and reliable determination of nutritional and toxic trace elements in alternative protein food samples.
Keywords: ICP-MS, AGD, He-KED, half-mass correction, accuracy, robustness, toxic elements, nutritional elements
<h4>4. Thermo Fisher Scientific: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_002822_tea_icap_rqplus_food_an002822_em_en_7e73327401.pdf">Analysis of process water from hydrogen fuel cells using triple quadrupole inductively coupled plasma mass spectrometry (ICP-MS)</a></h4>
<ul>
<li>Application note - Industrial</li>
</ul>
Goal: To demonstrate the analysis of process water from hydrogen fuel cells for inorganic trace contaminants with high sensitivity and accuracy using triple quadrupole ICP-MS.
Keywords: Fluorine, fuel cell, high resolution, ICP-MS, KED, PEM, process water, triple quadrupole, TQ-O₂ mode
<h4>5. Thermo Fisher Scientific: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_002822_tea_icap_rqplus_food_an002822_em_en_7e73327401.pdf">Combining full spectrum read-out and innovative automation capabilities for the robust and fast analysis of major and trace elements in fertilizers using ICP-OES</a></h4>
<ul>
<li>Application note - Environmental</li>
</ul>
Goal: To demonstrate the capabilities of the Thermo Scientific™ iCAP™ PRO XP ICP-OES Duo instrument, in conjunction with the Thermo Scientific™ iSC-65 Autosampler, for the fast and robust elemental analysis of fertilizers.
Keywords: ICP-OES, robustness, method validation, sensitivity, Step Ahead, limits of quantitation, analytical testing, toxic elements.

News from LabRulezICPMS Library Weeks 27-29, 2024

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in week 34, 2024? Check out new documents from the field of spectroscopy, especially ICP/MS techniques!
<blockquote>
<h4>👉 <a href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT ICPMS AND RELATED TECHNIQUES</a></h4>
</blockquote>
<blockquote>
👉 Need info about different analytical techniques? Peek into <a href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.
</blockquote>
This week we bring to you a poster from <a href="https://gcms.labrulez.com/events/568">ASMS 2024</a> by Agilent Technologies, applications by Shimadzu and Thermo Fisher Scientific, and technical note by Metrohm!
<h4>1. Agilent Technologies: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_7850_icpms_elemental_impurities_oligo_asms_2024_mp131_en_agilent_e8292cc884.pdf">Analysis of Elemental Impurities in Synthetic Oligonucleotides by ICP-MS In compliance with USP &lt;232&gt;/&lt;233&gt; and ICH Q3D(R2)/Q2(R1)</a></h4>
<ul>
<li>poster / <a href="https://gcms.labrulez.com/companies/296">ASMS 2024</a></li>
</ul>
Introduction: Synthetic oligonucleotides are short chains (oligomers) of deoxyribonucleic acid (DNA) or ribonucleic acid (RNA) molecules. They are used in applications such as polymerase chain reaction (PCR) tests, DNA sequencing and novel therapeutic products.
The synthesis of oligonucleotides involves a four-step cyclic process followed by multi-step downstream purification. This manufacturing process as well as environment, packaging, and container closure systems can be potential sources of contamination leading to inorganic impurities formation.
To control and monitor product safety, permitted daily exposure (PDE) limits of 24 elements are defined in ICH guideline Q3D(R2)1 and USP chapter &lt;232&gt;2. ICH Q2(R1)3 and USP&lt;233&gt; 4 describe analytical measurement requirements and procedures for the measurement of those elemental impurities. Although oligonucleotide products have not been included in those regulatory guidelines yet, the industry common practice is to follow those guidelines.
In this study, an analytical workflow (Figure1) was developed in accordance with the ICH/USP guidelinesfor the analysis of elemental impurities in an oligonucleotide sample using an Agilent 7850 ICP-MS. Data was acquired to evaluate the accuracy, specificity, reproducibility, and ruggedness of the method.
Conclusion: The study has demonstrated the suitability of the Agilent 7850 ICP-MS for the identification and quantification of 24 elements in a synthetic oligonucleotide sample in compliance with existing USP and ICH guidelines. Instrument and method performance requirements for stability, detectability, precision, specificity, ruggedness, accuracy, and spike recovery were all achieved per the criteria given in USP &lt;232&gt;/&lt;233&gt; and ICH Q3D(R2)/Q2(R1).
As the development and use of oligonucleotides in therapeutic applications continue to advance, the elemental impurities analysis of oligonucleotides using 7850 ICP-MS can safeguard the product quality and safety.
<h4>2. Metrohm: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/Metrohm_OMNIS_NIRS_An_efficiency_boost_for_your_706048fea4.pdf">OMNIS NIRS: An efficiency boost for your laboratory</a></h4>
<ul>
<li>Technical note</li>
</ul>
<h5>Routine lab analysis – simplified with OMNIS NIRS</h5>
Near-infrared spectroscopy (NIRS) is an analytical technique used to determine multiple parameters in samples quickly without requiring any chemicals. Determinations can be performed in liquids, pastes, and solids with this non-destructive method.
Many industries benefit from using NIRS in their laboratory workflows. Time and cost savings are two of the most convincing arguments for adopting NIRS in the laboratory. It is also easy to use, even for non-technical operators.
This White Paper discusses the concept and benefits of NIR spectroscopy, supplemented with the use of the Metrohm NIR solution, OMNIS NIRS, in several real-life laboratory application examples. Applications from the petrochemical, food and beverage, semiconductor, and pharmaceutical industries are used to demonstrate the unique functionalities of OMNIS NIRS in different situations.
SUMMARY: With OMNIS NIRS, users get a flexible, modular analytical solution which is suitable for many industries. Unique functionalities include:
<ul>
<li>automatic model development (OMD)</li>
<li>a high measurement speed</li>
<li>the possibility to recognize sample insertion and removal</li>
<li>sophisticated temperature control</li>
<li>the ability to combine different analytical technologies from a single manufacturer—even in an automated system</li>
</ul>
Boost the efficiency of your laboratory with OMNIS NIRS.
<h4>3. Shimadzu: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00712_en_f0d3971af4.pdf">Analysis of Metal Elements in Culture Medium Using ICPMS-2050</a></h4>
<ul>
<li>Application</li>
</ul>
User Benefits
<ul>
<li>Analysis of both trace and high-concentration elements is possible in culture media.</li>
<li>Culture media can be analyzed with simple dilution-only pretreatment using the ICPMS-2050.</li>
<li>The elements in the culture medium can be analyzed reliably and accurately over a long period.</li>
</ul>
Introduction: A culture medium usually contains elements spanning a wide range of concentrations, from trace (Co, Cu, Se, etc.) to several thousand ppm (Na). Elementsin the medium are important in cell cultures because they are taken up by the cells and contribute to enzyme activity and redox reactions. On the other hand, it has been pointed out that unexpected contamination from raw materials and equipment in the culture media manufacturing process may cause differences in element concentrations among batches. Therefore, it is important to know the element concentration profiles in the culture medium to achieve a homogeneous cell culture. 
ICP-MS issuitable for this purpose because it can analyze multiple elements with high sensitivity and has a wide dynamic range. In this Application News, an ICPMS-2050 was used to analyze both trace and high-concentration elements in a culture medium by dilution-only pretreatment. Furthermore, the spike recovery and long-term stability in the culture medium were evaluated using the ICPMS-2050 to confirm that there was no effect on the analytical value due to dilution-only pretreatment.
Summary: In this Application News, the ICPMS-2050 was used to analyze trace and high-concentration elements in a culture medium using dilution-only pretreatment. Good spike recoveries were obtained for all the measured elements, verifying that the culture medium can be accurately analyzed with dilution-only pretreatment. In addition, the results of CCV and internal standard recoveries showed good long-term stability.
<h4>4. Thermo Fisher Scientific: <a href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_002821_tea_icap_ms_icap_tqe_industrial_an002821_em_en_b60acdccc6.pdf">Analysis of process water from hydrogen fuel cells using triple quadrupole inductively coupled plasma mass spectrometry (ICP-MS)</a></h4>
<ul>
<li>Application</li>
</ul>
Keywords: Fluorine, fuel cell, high resolution, ICP-MS, KED, PEM, process water, triple quadrupole, TQ-O2 mode
Goal: To demonstrate the analysis of process water from hydrogen fuel cells for inorganic trace contaminants with high sensitivity and accuracy using triple quadrupole ICP-MS
Conclusions: The iCAP TQe ICP-MS was employed to analyze 53 elements including fluorine in process water derived from hydrogen fuel cells. Among the analytes, several critical interferences can cause unexpected bias, and these were investigated closely for effective and complete removal by means of selective collision / reaction cell reactions with oxygen. This study also included the development of a method for the analysis of fluorine, generally only possible in an indirect measurement. This analytical method was rigorously tested, and the results obtained clearly demonstrate the fowling analytical advantages:
<ul>
<li>The iCAP TQe ICP-MS operated in TQ-O2 and He KED modes allowed the analysis of 53 elements in relevant sample matrices over a wide concentration range. For minor elements, the method was tested over 4 orders of magnitude (from 0.01 to 100 µg·L-1), whereas major elements were tested between 1 to 100 µg·L⁻¹.</li>
<li>Using a high throughput analysis approach, with a new autosampler equipped with a Step Ahead feature for minimizing total analysis time, all elements relevant for the development of hydrogen fuel cell technology could be measured accurately with low detection limits.</li>
<li>The use of TQ-O₂ mode provided advanced performance for eliminating the polyatomic interferences of phosphorus, sulfur, silver, and cadmium in the simulated hydrogen fuel cell process water. This covered both polyatomic interferences as well as overlaps created by intense signals from isotopes of elements present in high concentrations.</li>
<li>he iCAP TQe ICP-MS offers the flexibility to choose high resolution for the Q1 and Q3 quadrupoles, enabling complete elimination of polyatomic interference and isobaric interferences.</li>
<li>The feasibility of fluorine analysis was demonstrated using an indirect method after complexation with barium. The iCAP TQe ICP-MS showed accurate and precise determination of fluorine as proven by the spike recovery tests performed.</li>
<li>Excellent stability performance was obtained with the iCAP TQe ICP-MS together with excellent CCV and spike recovery results over a 3-hour run without internal standard correction. This provides the advantage of avoiding potential contamination from addition of the internal standard solution.</li>
</ul>

News from LabRulezICPMS - Library Week 34, 2024

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in week 35, 2024? Check out new documents from the field of spectroscopy, especially ICP/MS techniques!<blockquote><h4>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT ICPMS AND RELATED TECHNIQUES</a></h4></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring to you a poster from <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/events/568">ASMS 2024</a> by Agilent Technologies, applications by Shimadzu, Thermo Fisher Scientific, and Metrohm!<h4>1. Agilent Technologies: <style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/po_8900_esi_microfast_yeast_asms_2024_wp774_en_agilent_06b2ce4cfb.pdf">Elemental Analysis in Yeast Cells and Selenium Enriched Yeast Cells by ICP-MS with Automated Micro-Flow Sample Introduction</a></h4><ul><li>poster / <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/companies/296">ASMS 2024</a></li></ul>Introduction: Nanoparticle and single cell elemental analysis by ICP-MS has become popular in recent years due technological advancements in ICP-MS, as well as increasing needs for many other advancing fields of applications (1). In the current study, an automated, micro-flow autosampler in combination with an Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) is used in the elemental analysis of nanoparticles and yeast cells. The sample introduction system is designed to deliver intact single cells or cell clusters to the plasma, while the ICP-MS offers high sensitivity for elemental determination within the cell or cell cluster. The preliminary results from this current study can potentially be applied to other applications, offering an easy and efficient way for high-throughput sample analysis.Conclusions: There is good agreement in the number of detected cells that contained the four elements, confirming the feasibility of the scICP-MS method for the measurement of multiple elements in single cells.<h4>2. <style type="text/css"></style>Shimadzu: <style type="text/css"></style><style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00718_en_8760c1a035.pdf">Screening Analysis of 24 Elemental Impurity Elements in Drugs Using ICPMS-2040/2050</a></h4><ul><li>Application</li></ul>User Benefits<ul><li>Controlled elements can be verified by a screening analysis of 24 elemental impurity elements.&nbsp;</li><li>Use of the preset method in LabSolutions™ ICPMS makes it possible to begin the analysis simply without laborious study of conditions.</li><li>Study of candidate elements for internal standard correction is possible.</li></ul>Introduction: The ICH Q3D Guideline for Elemental Impurities 1) establishes permitted daily exposure (PDE) levels for 24 elements of toxicological concern. The elementsthat should be considered in risk assessments differ, depending on the administration route of the drug product. For oral preparations, only seven elements of Class 1 and 2A should be considered, except for the intentional addition of elements such as catalyst utilization during synthesis. However, the origins of contamination by elemental impurities are diverse, including not only the components of the drug substance and additives, but also manufacturing equipment and implements. Therefore, a screening analysis was carried out for all 24 elements, considering potential elemental impurities. In addition, when internal standard correction is to be used, as in a related article a, the content of candidate internal standard elements in the specimens must be verified in advance. In this article, a simple concentration analysis of the 24 elements in a drug product as elemental impurities was carried out using the preset method for screening analysis of drug products, which is included in the ICPMS-2040/2050 (Fig. 1). The concentration of the elements used in internal standard correction in the drug was also measured, and it was found that the elements can be used in correction.Conclusion: In this article, a simultaneous screening analysis of 24 elemental impurity elements in an oral drug product and candidate elements for internal standard correction was carried out using an ICPMS-2040/2050. The time and work necessary in study and registration of the analysis conditions and measured masses of the large number of elements in this experiment can be greatly reduced by using the preset method of the LabSolutionsICPMS software.<h4>3. <style type="text/css"></style><style type="text/css"></style>Thermo Fisher Scientific: <style type="text/css"></style><style type="text/css"></style><style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an41218_oe_basic_inclusion_analysis_en_024ffa9f51.pdf">Iron and steel - ARL iSpark Plus Optical Emission Spectrometer - Basic inclusion analysis</a></h4><ul><li>Application</li></ul>Benefits&nbsp;<ul><li>Ultra-fast evaluation of some main inclusion types</li><li>Close to real-time inclusion check in up to hundreds of samples a day</li><li>More effective control of inclusiondependent steel properties</li><li>Helps reduce the number of costly issues caused by inclusions</li></ul>Basic inclusion analysisNon-metallic inclusions dramatically affect steel properties and cause process issues like nozzle clogging. The costs associated with bad steel properties, process issues or customer complaints may amount to several hundred thousand dollars every year. Controlling the formation and the modification of non-metallic inclusions has therefore become essential to the production of modern steels as demanded by today’s markets.The Thermo Scientific ARL iSpark Plus is a high-end metal analyzer that allows precise and accurate elemental analysis of steel. It also enables ultra-fast analysis of non-metallic inclusions, enabling a steel plant to control steel quality and production process even more effectively, and considerably reduce the costs associated with unwanted inclusions.The Basic Inclusion Analysis Spark-DAT (Spark Data Analysis and Treatment) option is the entry-level method for standard inclusion analysis in low alloy steel. It reports the amounts of some of the most common types of non-metallic inclusions together with the elemental concentrations, helping steel plants to guarantee the quality and the properties of the steel product, as well as the smooth running of the production process.Principles and details on Spark-DAT inclusion analysis can be found in the application note of the Standard Inclusion Analysis (AN41219).<h4>4. <style type="text/css"></style><style type="text/css"></style><style type="text/css"></style>Metrohm: <style type="text/css"></style><style type="text/css"></style><style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_nir_118_download_7c2174fc54.pdf">Quantification of cotton content in textiles by near-infrared spectroscopy</a></h4><ul><li>Application</li></ul>Fast, non-destructive determination of cotton with NIRSCotton and polyester are two of the most popular fabrics for creating garments. Polyester is a synthetic material produced from petrochemical products, and cotton is a natural and sustainable fiber harvested from cottonseeds. Polyester is the best choice for water-resistant, durable apparel, while cotton is better suited for breathable, cool summer clothing. Textile products must be labeled according to their fiber composition. The procedures for the determination of fiber composition include mechanical, chemical, and microscopic methods—all of which are time consuming. In contrast, nearinfrared spectroscopy (NIRS) is a fast and chemicalfree alternative. This Application Note shows how NIR spectroscopy can be used to determine the cotton content in textile products within 30 seconds.CONCLUSION&nbsp;This Application Note demonstrates the feasibility of NIR spectroscopy to determine the cotton percentage in textile blends quickly and easily. Vis-NIR spectroscopy offers users a fast, cost-effective, and highly accurate alternative to other standard testing methods.Additionally, NIRS analysis is non-destructive, completely reagent-free, and gives results in only 30 seconds.

News from LabRulezICPMS - Library Week 35, 2024

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in week 40, 2024? Check out new documents from the field of spectroscopy, especially ICP/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT ICPMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring to you applications by Agilent Technologies, Shimadzu, and Metrohm and a poster by Thermo Fisher Scientific!<h4>1. Agilent Technologies: <style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_v_groove_nebulizer_5994_7788en_agilent_4ae77b4b3a.pdf">Reducing Instrument Downtime in Elemental Analysis of Lubricant Oils as per ASTM 5185</a></h4><ul><li>Application</li></ul><h5>Run samples faster and for longer using the V-groove nebulizer</h5>AbstractIn this application note, lubricant oil samples were analyzed using an Agilent 5900 Synchronous Vertical Dual View (SVDV) inductively coupled plasma optical emission spectrometer (ICP-OES) coupled with an Agilent Advanced Valve System 6 (AVS 6) and the Agilent V-groove nebulizer to enable the rapid analysis of over 1,000 samples in 6 hours (more than 160 samples per hour). The V-groove nebulizer provides exceptional performance characteristics, robustness, and durability, even when using troublesome samples. It also provides a reduction in sample loading on the plasma, which reduces carbon formation on the injector of the torch, allowing extended run times, while exceeding the sensitivity requirements required for the ASTM D5185-18 standard method.IntroductionElemental analysis of lubricant and hydraulic oils is essential for predictive and preventive maintenance, as well as trend analysis in many heavy industries. The ASTM D5185‑18 standard method1 is the gold standard in tribology laboratories globally to quantify additive elements, wear metals, and contaminants. This method uses ICP-OES for the rapid elemental determination of 22 elements in both used and unused lubricating and base oils, providing quick screening of used oils for signs of wear.Tribology laboratories typically process hundreds of samples daily; therefore, they are constantly searching for ways to enhance efficiency and improve sample throughput. Instrument downtime caused by blockages in the sample introduction system (SIS) can be a common problem in these high-throughput labs. These blockages are typically caused by suspended particles in the samples blocking the nebulizer, and carbon deposits blocking the injector of the torch. Although various methods exist to remove the blockage from the nebulizer and clean the torch, all require extinguishing the plasma to remove and clean the SIS.The use of a robust nebulizer is a strategy that can enable tribology laboratories to run more samples with reduced blockage. This will improve their workflows and increase sample throughput, reducing both instrument downtime and their running costs. One example of a robust nebulizer that helps to overcome the blockage issues is the inert, high-total-dissolved-solids (high-TDS) Agilent V-groove nebulizer, which is capable of aspirating highly dissolved solids and slurries (up to 30% dissolved solids with a maximum particle size of 350 μm). Its inert construction also ensures that any solvent can be nebulized.In this application note, used diesel engine lubricant oil samples were analyzed using the 5900 SVDV ICP-OES coupled with the AVS 6 and the V-groove nebulizer, following the ASTM D5185-18 standard method.&nbsp;ConclusionThis application note shows the suitability of the Agilent 5900 SVDV ICP-OES used with the Agilent AVS 6 and inert V-groove nebulizer for rapid multi-element analysis of used lubricant oil samples using the ASTM D5185-18 standard method.Excellent long-term stability was demonstrated when more than 1,000 samples were analyzed over a six-hour period (22 to 23 seconds per sample). All measurements of this spiked oil sample were within ± 10% of the expected value, with precision better than 5% RSD in most cases. The spike recovery study showed how the 5900 ICP-OES, used with the inert V-groove nebulizer, can accurately detect low range concentrations of wear metals and high concentrations of the elements from the additive package in a single analysis. The inert V-groove nebulizer also enabled the samples to be run faster, with excellent accuracy.Despite no oxygen injection being used, there were no signs of blockage of the injector of the torch, or carbon deposition after the test. The V-groove nebulizer design reduces sample loading on the plasma, minimizing carbon buildup while maintaining the sensitivity required for the ASTM D5185 standard method. No nebulizer blockage was experienced while collecting the data for this study. The inert V-groove nebulizer allows extended run times by reducing the frequency of torch and nebulizer maintenance. This demonstrates the stability of the 5900 ICP-OES and the suitability of the inert V-groove nebulizer for high-throughput tribology laboratories, by reducing instrument maintenance downtime and improving sample throughput.<h4>2. Thermo Fisher Scientific: <style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/pn_002807_tea_icp_ms_halogens_wpc_2024_pn002807_en_b235f7ba82.pdf">WPC: Sensitive and interference free analysis of halogens using triple quadrupole ICP-MS</a></h4><ul><li>Poster / WPC</li></ul>ABSTRACTThe analysis of halogens is important in many different industries, such as environmental monitoring, pharmaceutical, oil and gas, but also Li-ion battery and renewable fuels. Halogen analysis is commonly carried out using ion chromatography (IC), whereas argon plasma-based techniques like ICP-MS are less common, due to poor sensitivitiy, and potential spectral interferences. This study describes a complete analytical workflow using the Thermo Scientific™ iCAP™ TQe ICP-MS for the accurate and precise quantification of challenging halogen analytes like fluorine, chlorine, and bromine.CONCLUSIONSThis work highlights how triple quadrupole ICP-MS systems, such as the iCAP TQe ICP-MS, operated in TQ-O 2 mode can be used for accurate and precise quantification of challenging analytes such as halogens.<ul><li>It could be shown that chlorine and bromine can be analyzed directly using optimized instrument conditions.</li><li>It further highlights the feasibility of iCAP TQe ICP-MS for indirect but accurate and precise determination of fluorine by following approach of complex formation with barium under optimized and controlled conditions</li><li>The analytical data and observations made during this study strongly suggest that iCAP TQe ICP-MS equipped with dedicated mass flow controllers (MFCs) for introduction of pure oxygen and pure helium as cell gases is a powerful tool to accomplish the otherwise challenging analysis of halogens.</li><li>Upcoming studies will focus on the application of the fluorine measurements in hyphenated techniques, such as liquid chromatography hyphenated to ICP-MS to assess the potential for emerging contaminant screening, i.e. of PFAS</li></ul><h4>3. Shimadzu: <style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00772_en_4935e06938.pdf">Analysis of Elemental Impurities in Anode Materials for Lithium-Ion Secondary Batteries Using the ICPE- 9820</a></h4><ul><li>Application</li></ul>User Benefits<ul><li>Elemental impurities in the anode materials of lithium-ion secondary batteries can be measured.</li><li>Even after measurement, elements and wavelengths can be added to check for unexpected elemental impurities in the anode materials.</li><li>The system uses a mini torch that consumes less argon gas, thus reducing running costs.</li></ul>IntroductionLithium-ion secondary batteries (LIBs) are widely used in mobile devices, electric vehicles, hybrid cars, and more. One of the components of LIBs, the anode, accumulates and releases Li ions during charging and discharging. Graphite-based materials are mainly used as the anode material in LIBs. In China, one of the major producers, the analysis of elemental impurities in graphite, which is used as LIB anode material, is required by GB/T 24533-20191) using inductively coupled plasma atomic emission spectroscopy (ICP-AES).In this Application News, elemental impurities in LIB anode materials were analyzed using the ICPE-9820. Spike recovery tests were performed to confirm the validity of the analytical values. Additionally, the “Acquisition for All Wavelength” feature allows for checking the presence of elemental impurities that were not subjected to quantitative analysis.ConclusionIn this Application News, an analysis of elemental impurities in LIB anode materials was performed using the ICPE-9820. Good spike recoveries were obtained, confirming the accuracy of the analysis. Additionally, elements and wavelengths were added after the measurement to identify elemental impurities other than the analyzed elements present in the anode materials.<h4>4. Metrohm: <style type="text/css"></style><a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_pan_1064_download_39b556efd8.pdf">Monitoring complexing agents in galvanic baths inline with Raman spectroscopy</a></h4><ul><li>Application</li></ul>The main purposes of galvanic process baths include the surface refinement of workpieces and the setting of physical properties. To this end, bath additives (e.g., organic compounds or complexing agents) are regularly added in different amounts, depending on the processing load. Since the bath composition changes continuously due to the introduction of the workpieces, close monitoring of the concentration of the bath additives is necessary to ensure that the end product quality is at the highest level.This Process Application Note presents a method to accurately analyze complexing agents inline in galvanic baths with a 2060 Raman Analyzer from Metrohm Process Analytics. This enables real-time bath control and thus an increase in production efficiency and product quality.CONCLUSIONRaman spectroscopy is an easy-to-use analytical technique that identifies liquids and solids within seconds. The 2060 Raman Analyzer from Metrohm Process Analytics is a high-performance Raman system designed for monitoring different processes like electroplating.Together with Metrohm’s Vision and IMPACT software, the 2060 Raman Analyzer can be used to acquire real-time results, increase roductivity, and lower production costs.

News from LabRulezICPMS Library - Week 40, 2024

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in week 41, 2024? Check out new documents from the field of spectroscopy, especially ICP/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT ICPMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring to you applications by Agilent Technologies, Shimadzu, and Bruker and a poster by Thermo Fisher Scientific!<h4>1. Bruker: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/AN_M57_Lubricating_Oil_Analysis_EN_a8d3b3f7f4.pdf">Used Lubcricating Oil Analysis by FT-IR: An Overview</a></h4><ul><li>Application</li></ul>Oil analysis by FT-IR is a simple method to detect dilution, degredation or illegal additives in all types of oils.Fourier-Transform Infrared spectroscopy utilizes the interaction of invisible infrared radiation and matter. This yields valuable molecular information and allows the identification of chemicals in a few seconds without consumables or additional chemicals.Generally, this can be used on solids, liquids and gases and of course industrial oils. This method has been widely accepted and is used by automotive industries, drilling companies, legal authorities and even at F1-racing events.Why are in-service lubricating oils tested?To readily assess the lubricant’s performance, testing and diagnosis of oils in-service is necessary. This is especially important to prolong engine life and avoid sudden and unforeseen damages to the engine. Lubricating oils reduce friction and protect the engine’s moving parts from wear and corrosion. In diesel engines, the oil must also suspend soot particle resulting from incomplete fuel combustion to avoid depositions.If the lubricant is saturated, performance decreases significantly. The analysis of in-service oils also provides information about engine-related functions to identify component failures or harmful operating conditions.Advantages of FT-IR in oil analysisFor one, the low cost of modern Fourier transform (FT-IR) systems, along with the ability to obtain high-quality data rapidly has made this technique very attractive. Especially in routine analysis, there is a strong demand for for quick results in routine monitoring of in-service lubricant. FT-IR has already started to gradually replace replace various time-consuming and tedious traditional wet chemical and physical analysis methods.Therefore, the ASTM adopted a standard practice E2412 titled; “Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier-Transform Infrared (FT-IR) Spectrometry” illustrating the increased application of FT-IR spectroscopy in this field.ConclusionFT-IR is a reliable and valid approach to oil analysis, that not only allows you to access a lot of information with a single measurement, but also simplifies the procedure.Infrared spectrometers come in various shapes and configurations and Bruker even offers a dedicated used oil analysis kit.<h4>2. Thermo Fisher Scientific / WPC: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/pn_002806_tea_icp_ms_epa_wpc_2024_pn002806_en_699e98e308.pdf">Novel developments in ICP-MS: How can the analysis of complex samples be made simple?</a></h4><ul><li>Poster / WPC</li></ul>ABSTRACTInductively Coupled Plasma Mass Spectrometry (ICP-MS) is one of the key technologies used for the determination of trace element concentrations in almost any sample type. Following its initial development in 1980, it has seen an unparalleled ramp up, and grew from a high-end tool used in cutting edge research laboratories to a widely-used technique used in many thousands of laboratories across all regions. In 40 years of being available, there have been developments to drive detection limits lower, hyphenation of separation techniques and accessories to allow for direct sampling of solids, increases in productivity and sample throughput, and, most of all, better removal of interferences. This presentation will provide an overview on novel developments in ICP-MS, providing an unmatched ability to tackle samples with outstanding complexity, both in terms of matrix load and interferences.INTRODUCTIONAlongside the technological development, the complexity of samples to be analyzed using ICP-MS increased at the same level, and typical samples run by analytical testing laboratories today require the analysis of matrix levels previously analyzed using ICP-OES. This is particularly true for environmental monitoring, with region-specific standards and guidelines put in place to ensure that soil is safe before any use of the land and to assure that toxic metals are not introduced after anthropogenic activities, such as the release of industrial waste, use of fertilizers, and mining. One key analytical method is U.S. EPA Method 6020B (SW-846), which governs the analysis of soils, solid waste, and wastewaters.CONCLUSIONS<ul><li>All the requirements of EPA Method 6020B were met during the test period of three days, enabling the analysis of a total of 600 samples.</li><li>The accuracy determined by the analyses of two NIST SRMs further highlights the capability of the iCAP RQplus ICP-MS in delivering reliable data.</li><li>The consistent internal standards recovery of 80–120% observed during the analysis of a mixed batch of typical samples, analyzed in a period of 12 hours, demonstrates the robustness of the system and the absence of physical interferences causing signal drift and suppression or enhancement.</li><li>The highest dilution setting available for AGD allowed the aspiration of up to 25% w/w brine samples and allowed excellent MDLs to be obtained, while eliminating the need for labor-intensive manual sample dilution and accelerating sample throughput.</li><li>Excellent CCV recovery and spike recovery results, as well as stable and consistent internal standards response, were obtained across a batch containing 120 samples of a 2.5% w/w brine solution, demonstrating the reliability of the method.</li></ul><h4>3. Agilent Technologies: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_kinetics_oscillating_cary_3500_multicell_uv_vis_5994_7396en_agilent_58e9769006.pdf">Kinetics of an Oscillating Reaction using Temperature-Controlled UV-Vis Spectroscopy</a></h4><ul><li>Application</li></ul><h5>Characterizing the Briggs-Rauscher reaction at four temperatures simultaneously using an Agilent Cary 3500 UV-Vis</h5>AbstractThe Briggs-Rauscher reaction involves colored intermediates, with kinetics influenced by temperature. Tracking these color changes is achievable using temperature-controlled UV-Vis spectroscopy. However, the experiment requires efficient temperature control, cuvette stirring, and rapid acquisition speed due to the millisecond timescale of the color changes.In this work, an Agilent Cary 3500 UV-Vis spectrophotometer was used to investigate this reaction at four different temperatures simultaneously. The system's fast data collection and accurate temperature control enabled efficient characterization of complex reaction kinetics.IntroductionThe Briggs-Rauscher reaction is one of the most captivating demonstrations that a chemist can perform.1 It is an oscillating reaction that cycles through multiple color changes for several minutes, providing a visual example of how chemicals transform in real time (see Figure 1). The reaction involves several chemicals, as described in the sample preparation section of the note. When the reagents are mixed, the clear and translucent solution gradually turns amber before undergoing a striking color change to dark blue. The blue color then gradually fades back to the colorless state. This cycle continues for several minutes until all reagents are consumed.ConclusionAn in-depth investigation of the kinetics of the Briggs-Rauscher oscillation reaction was carried out at four different temperatures simultaneously using the Agilent Cary 3500 UV-Vis spectrophotometer with Multicell Peltier sampling module. The unique multizone feature of the Peltier temperature controlled Multicell facilitated the multizone experiments of four pairs of cuvettes. Each pair of cuvettes contained the reagents and reference solutions.The scan kinetic experiments identified chromophores associated with different intermediates in the reaction, enabling the selection of the most suitable wavelength (610 nm) for single point kinetic measurements of the oscillating reaction. The kinetic measurement results at four temperatures (5, 10, 20, and 30 °C) showed that the oscillating cycle shortened with increasing temperature. To better understand the effect of each temperature on the Briggs-Rauscher oscillation, the data were used to build an Arrhenius plot. The plot was then used to calculate the activation energy, resulting in a calculated value of 58 kJ/mol for the overall reaction. The Cary 3500 UV-Vis spectrophotometer with Multicell Peltier sampling module saves time, while producing valuable data that contribute to a more comprehensive understanding of complex reactions.<h4>4. Shimadzu: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_01_00797_en_eae5c6e3f6.pdf">Analysis of 23 Elements in Wastewater by U.S. EPA Method 6020B Using ICPMS-2050</a></h4><ul><li>Application</li></ul>User Benefits<ul><li>It is possible to measure 23 elements, including trace and high-concentration elements, in wastewater according to EPA Method 6020B.</li><li>The interference of MoO on Cd can be effectively reduced using hydrogen reactions.</li><li>Internal standard fluctuation can be easily observed using the Internal Standard Intensity Fluctuation Graph function of LabSolutions™ ICPMS.</li></ul>IntroductionBecause of climate change, population growth and ongoing industrialization, various types of waste are being released into the environment, causing damage to ecosystems. Particularly, the adverse effects of increased heavy metal concentrations in wastewater and the potential effects on human, animal and plant health are of significant concern. Therefore, monitoring these elements in wastewater is one of the most frequently performed environmental analyses.The U.S. Environmental Protection Agency published EPA Method 6020B to control 23 metals in environmental water using ICP-MS. In this Application News, 23 elements in wastewater were analyzed using the ICPMS-2050. Analytical samples’ spike recovery tests and long-term stability tests were performed in accordance with the quality control (QC) requirements of EPA Method 6020b.SummaryAn ICPMS-2050 was used to analyze 23 elements in wastewater following U.S. EPA Method 6020B. All the analyses met the QC requirements of EPA Method 6020B, confirming the analytical method’s usefulness.IDLs obtained in this analysis were sufficiently low compared with the standard values of each regulation for wastewater analysis, and high-sensitivity analysis was realized. In the spike recovery test with SIC solution and samples, good recoveries were obtained, confirming the accuracy of ICPMS-2050.In the long-term stability test, the CCV recoveries of all the analytes were within 90 to 110 %. Furthermore, the fluctuation of all internal standards with respect to the intensity during the initial calibration was within the QC requirements of EPA Method 6020B, indicating the high stability of the ICPMS-2050 system.The ICPMS-2050 mini-torch system provides accurate analysis, high stability, low argon gas consumption and low running costs.

News from LabRulezICPMS Library - Week 41, 2024

Our Library never stops expanding. What are the most recent contributions to LabRulezICPMS Library in week 42, 2024? Check out new documents from the field of spectroscopy, especially ICP/MS techniques!<blockquote>👉 <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/library">SEARCH THE LARGEST REPOSITORY OF DOCUMENTS ABOUT ICPMS AND RELATED TECHNIQUES</a></blockquote><blockquote>👉 Need info about different analytical techniques? Peek into <a target="_blank" rel="noopener noreferrer" href="https://lcms.labrulez.com/library">LabRulezLCMS</a> or <a target="_blank" rel="noopener noreferrer" href="https://gcms.labrulez.com/library">LabRulezGCMS</a> libraries.</blockquote>This week we bring you applications, brochures, and technical notes by Agilent Technologies, Shimadzu, Anton Paar, and Bruker, and a poster by Thermo Fisher Scientific!<h4>1. Agilent Technologies: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/5991_9342_EN_cost_of_ownership_icp_ms_technicaloverview_356e0d35f4.pdf">Critical Factors Affecting Cost-of-Ownership of ICP-MS</a></h4><ul><li>Technical note</li></ul>ICP-MS in high-throughput commercial laboratoriesICP-MS is the technique of choice for metals laboratories, due to its unique combination of full coverage for all regulated analytes including mercury, low detection limits, and high sample throughput. But not all ICP-MS systems are equally suited to the needs of commercial laboratories.Agilent’s 7850 and 7900 ICP-MS systems provide a powerful, integrated solution for the most demanding applications. Software tools, auto-optimization, and method/report templates streamline setup and routine operation, while high matrix tolerance, simple, reliable helium cell gas mode, and wide dynamic range simplify routine analysis of varied sample types.In this Technical Overview, we show how productivity gains and long-lifetime consumables contribute to making Agilent ICP-MS instruments the ideal choice for high-throughput commercial laboratories.System SuitabilityThe Agilent 7900 single quadrupole ICP-MS is optimized to deliver the high levels of performance needed for more difficult applications. As a result, the detector settings and thresholds are set to achieve the high sensitivity typically required in these demanding applications. Even so, for a typical suite of around 40 analytes and internal standard (ISTD) elements, the EM lifetime calculations indicate that a laboratory running 300 drinking water samples per day and operating 20 days per month can expect their Agilent 7900 ICP-MS EM detector will typically last more than 10 years. Even laboratories running high matrix samples with analyte levels between 100 ug/L (ppb) and 10 mg/L (ppm) can expect almost 6 years of operation from their Agilent 7900 ICP-MS detector.The Agilent 7850 single quadrupole ICP-MS is optimized for more routine applications, where factors such as stability, sample throughput and low operating costs are typically more important than achieving the highest sensitivity. Consequently, the detector settings and thresholds of the 7850 detector are optimized for extended life with lower sensitivity than on the 7900. This means that the lifetime of the EM detector used in the Agilent 7850 ICP-MS is typically around twice as long as the figures quoted above for the EM detector used in the 7900.As well as the lower cost of replacement detectors, this long lifetime also contributes to reduced maintenance downtime, further enhancing productivity.<h4>2. Thermo Fisher Scientific: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/pn_002809_tea_icp_oes_fertilizer_analysis_wpc_2024_pn002809_en_b55bce092d.pdf">WPC: High throughput and robust analysis of fertilizers using ICP-OES</a></h4><ul><li>Poster / WPC</li></ul>ABSTRACTAnalytical testing laboratories frequently deal with heavy sample loads and a large suite of analytes but have limited time for delivering accurate results. In order to accomplish the desired productivity, short sample run times, robust methods, and minimum instrument downtime are fundamental requirements in such laboratories. This can be achieved with a technology such as inductively coupled plasma optical emission spectroscopy (ICP-OES) because it is traditionally highly matrix tolerant and modern ICP-OES instruments can additionally offer high sensitivity and speed.INTRODUCTIONThe developed method measures major and trace elements in the radial mode that covers the full spectrum in a single exposure, from UV to visible range, simultaneously for all selected wavelengths without any additional data acquisition time. The small exposure times, when coupled with the Step Ahead feature of the autosampler, help realize a run time of only 36 s per sample (inlcuding uptake, analysis, and rinse) without the use of a discrete sampling valve. The method has been validated using standard reference materials, spike tests and a &gt;5 hours long robustness test including &gt;500 samples and regular QC checks. The results demonstrate high robustness and reliability, making the method an ideal choice for many different sectors where high productivity is required for anaylsing samples like water, waste water, soil, fertilizer, animal feed quality control, battery components and more.CONCLUSIONS<ul><li>A quick and simple method with a run time of 36 s per sample (including uptake and wash) for a full analysis of elements present in fertilizers has been developed</li><li>The use of the Step Ahead feature available on the iSC-65 autosampler compliments the speed of the iCAP PRO XP ICP-OES DUO. The combination of both provides the opportunity to reduce sample turnover times further by almost 30%.</li><li>The method allows to achieve the typically required limits of quantifications for commonly regulated elemental contaminants in fertilizers and at the same time it can cover a large linear dynamic range between 0.01 – 20 mg·kg-1 for trace elements and 1 – 1500 mg·kg-1 for elements present in higher concentrations.</li><li>The concept of the application can be easily extended to other sample types, such as soil or wastewater analysis. ICP-MS instruments can also benefit from single mode measurement and the high-speed capabilities of the iSC-65 autosampler.</li></ul><h4>3. Bruker: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/AN_M167_Oil_in_Water_Analysis_by_Solid_Phase_Extraction_EN_e4f8d41759.pdf">Oil in Water Analysis by Solid Phase Extraction</a></h4><ul><li>Application</li></ul>About oil, grease and water pollutionMany international legislations acknowledge that the monitoring of oil and grease content of industrially used (waste) water is essential to protect aquatic and human life.The 1974 US Clean Water Act mentions oil and grease as a conventional pollutant. This term describes a water pollutant that is amenable to treatment by a municipal sewage treatment plant.Wherever oil and grease are handled industrially and on a larger scale (e.g. offshore oil-rigs) their discharge into the environment should be tested.Analysis of oil and grease in waterThe current standard methods use highly flammable solvents such as pentane or hexane, to extract oil and grease from water. The extract is then analyzed by gas-chromatography (GC), or evaporated to measure the residue.Since pentane and hexane are highly flammable and form explosive gas-air mixtures, the use of these solvents on oil platforms is not permitted. Hence, the wastewater samples are transferred to a mainland lab, which is a very costly and time consuming procedure.FT-IR as ASTM approved alternativeThe ASTM approved ”Standard test method for solvent-free membrane recoverable oil and grease by Infrared determination D7575” is a more convenient alternative. Briefly, this method quantifies oil and grease by processing a water sample through an oil capturing membrane and analyzing the membrane by transmission infrared spectroscopy. The membrane material does not block in the infrared range of interest.Since this method does not use flammable and hazardous solvents, it can be performed on-site without moving the sample to the main analytical facility. This considerably reduces time for the analysis and enables near-real-time feedback and control for customers.Conclusions and summaryBruker‘s ALPHA II FT-IR in combination with OSS extractor allows fast, safe, accurate, precise and cost-effective quantification of oil and grease in wastewater at ppm levels in a few minutes. No hazardous chemicals are used in the analysis, no need for chemical explosion fume hoods, no additional glassware nor sensitive balances.In addition, FT-IR spectroscopy enables tracing the origin of the contamination, hence providing crucial and timely information to stop the contamination from becoming larger or from happening again.<h4>4. Shimadzu: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/an_06_saip_sp_077_en_31c9b69fcb.pdf">Elemental Analysis with Mercury Speciation in Honey Using LC-ICP-MS</a></h4><ul><li>Application</li></ul>User Benefits<ul><li>Simultaneous analysis of essential elements for normal metabolism and harmful toxic elements.</li><li>LC-ICP-MS system enables speciation analysis of mercury.</li><li>TRM software enables centralized analysis of LC-ICP-MS systems.</li></ul>IntroductionHoney is the natural sweet substance, produced by Honeybees from the nectar of plants. Honey has a superior nutritional value and contains a variety of minerals that are minor constituents. Elements such as Cu, Sn, and Zn are essential for normal metabolism in human and elements such as Pb, Cd, As and Hg are considered as toxic and harmful to human metabolism. Mercury (Hg) is considered as an element of concern for major public health by the World Health Organization (WHO)1). Methylmercury (CH3Hg) is the most common and toxic organic form of mercury. The source of these toxic elements could be from air pollution, pesticides, industrial waste or natural disaster which goes from ground water to soil and then from plants nectar to Honeybees.The potential for mercury contamination has become serious concern to human and environmental health. The contamination of mercury and its conversion to methylmercury is largely depending on the location in which it arrives. If the location is favorable, then the conversion of inorganic mercury to the significantly more toxic organic form of methylmercury happens.The Food Safety and Standards Authority of India (FSSAI) has laid down limits of 1.0 mg/kg for total mercury and 0.25 mg/kg CH3Hg in food products2). To meet these limits ICP-MS is widely used as an accurate and reliable technique for quantification. In the present study, one honey sample was analyzed using Shimadzu ICPMS-2030 for quantitation of total and inorganic mercury along with quantification of methyl mercury by coupling ICPMS-2030 to HPLC as a speciation technique.ConclusionThe present work demonstrates the suitability of the HPLC-ICP-MS method for the quantification of inorganic mercury and methylmercury in honey, in accordance with FSSAI regulations. The inorganic and methylmercury forms of Hg were measured accurately at low-ppb concentrations in honey sample using a Shimadzu Inert HPLC LC-20Ai coupled to a Shimadzu ICPMS-2030. The separation of both species was complete in less than five minutes. LabSolutions TRM software can perform LC and ICP-MS measurements. ICPMS-2030 enables quantitative analysis of elements essential for normal metabolism such as Cu, Sn and Zn and toxic trace elements such as Pb, Cd, As and Hg in honey. Excellent detection limits were obtained using Shimadzu ICPMS-2030 with unique mini-torch technology which uses lowest argon flow rates as compared to any other conventional ICPMS.<h4>5. Anton Paar: <a target="_blank" rel="noopener noreferrer" href="https://icpms.labrulez.com/labrulez-bucket-strapi-h3hsga3/XDLIP_073_EN_B_Brochure_DMA_Overview_c56ddf4ee3.pdf">Laboratory and Portable Density and Concentration Meters</a></h4><ul><li>Brochure</li></ul>The DMA: Always SuperiorInvented as the world’s first digital density meter, the DMA has been perfected over decades to become the gold standard in the industry. With a user base spanning the globe, it’s earned the trust of hundreds of thousands of satisfied customers. Whether you’re out in the field, on the production floor conducting high-throughput QC, or engaged in precision-driven R&amp;D. Always.At Anton Paar, it’s always been our ambition to be the unrivaled leader in density measurement. Every day, we’re boldly innovating, carefully engineering, and precisely manufacturing. Whether it’s the DMA’s handcrafted glass measuring cell, the internally assembled circuit boards, or even our handmade cables, attention to detail and full control over our value chain have always been central ingredients for success. This is how we create the most advanced and progressive density meters that don’t just meet our customer’s expectations but surpass them. Always.The DMA is a promise to precision. Its patented “Pulsed Excitation Method” (PEM) delivers unprecedented measuring accuracy up to the 6th digit at a measuring speed that’s unmatched in the industry. For superior results you can count on. Always.The DMA’s software experience is backed by the expertise gained from thousands of customer applications and designed around our users’ needs. For a superior measuring experience. Always.The DMA is built to operate flawlessly even in challenging conditions where other instruments fail. Highly viscous samples? Low temperatures? Particles? Our answer: A superior density meter. Always.The DMA: Always Superior<ul><li>Measuring accuracy<ul><li>The superior accuracy of our density meters ranges from three to six digits. From the most accurate density meter in the world to the portable, intrinsically safe version. Unaffected by the surrounding environment, including altitude and temperature, or by the nature of the sample itself (e.g., viscosity), they deliver exceptional reproducibility time and time again.</li></ul></li><li>Compliance with industry standards&nbsp;<ul><li>Whatever your industry, our density meters comply with all the standards you need to fulfill. This way, you’re always on the safe side with our results, and you’re prepared for – and easily pass – audits and lab inspections. So no headaches there. And in sales, you can be sure that both parties are speaking the same language, with no room for misunderstandings.</li></ul></li><li>Experience: Application expertise<ul><li>Researchers around the world prefer our density meters. Quality control managers across every industry for big and small companies rely on them everywhere. They all know that the decades of application expertise behind the instruments’ design guarantee a superior instrument and a more reliable measurement. And, as partners in their success, we’ve got the kind of tips and know-how that only half a century of application expertise can bring.</li></ul></li><li>Usability features:<ul><li>E.g., bubble detection We didn’t start making density meters yesterday. We channel our market-leading experience into designing density meters that are easy for everyone to use. Whether it’s automatic bubble detection or U-View™ camera automatic sample monitoring, the selectable industry profiles, or the guided workflows, we ensure every one of our density meters is a joy to use.</li></ul></li><li>Service availability worldwide: Able to be repaired, 10-year parts guarantee<ul><li>Ask anyone: We’re known for the durability of our instruments and the quality of our service. Each instrument comes with a three-year warranty. If you need assistance, someone from our worldwide service network, speaking your language, is on location within 24 hours. And every time we move up to a new instrument generation, we guarantee the spare parts for your instruments for at least 10 years.</li></ul></li></ul>

News from LabRulezICPMS Library - Week 42, 2024

Article

Product

Events

Webinars

Application

Academy

Video

Poster

Scientists

Plastics

Environment

Food

Water

Health

Presentation

Scientific article

Interview

Toxicology

Popularization

Science and research

Software

Covid-19

Career

Laboratories

Various

Zaměření

Type of News

Focus

Everything from the world of analytical chemistry in one place. We connect people in solving their problems. At Labrulez you will find all the necessary information easily, quickly and clearly. Stop searching and start finding.

LabRulez

2026 AOAC INTERNATIONAL Annual Meeting & Exposition

A Hands‑On Spectroscopy Workshop in Agilent Wood Dale Center of Excellence

Shimadzu at 2026 AOAC Annual Meeting & Exposition

ICP-MS for Hybrid Photoelectrode Characterization

Learn to Select and Apply the Proper Internal Standard in ICP-OES

From Legacy Workflows to Paperless Labs: Track Every Sample, Process, and Decision