Oxygen in Aluminum and Aluminum Alloys

® Oxygen in Aluminum and Aluminum Alloys LECO Corporation; Saint Joseph, Michigan USA Instrument: TC500-Series Introduction The determination of oxygen in aluminum is an extremely important quality control measure for both wire and integrated circuit (IC) manufacturers, but for different…

® Oxygen in Aluminum and Aluminum Alloys LECO Corporation; Saint Joseph, Michigan USA Instrument: TC600-Series Introduction Sample Preparation This method is written for solid samples; Aluminum powder, chip or granular samples can be analyzed following the procedures used for reactive/refractory…

® Oxygen in Copper and Copper Alloys LECO Corporation; Saint Joseph, Michigan USA Instrument: TC600 RO600/TCH600/ROH600 also applicable Introduction Sample Preparation This method is written for solid samples; a clean representative sample is required in order to obtain optimum results.…

Oxygen in Lead and Lead Alloys LECO Corporation; Saint Joseph, Michigan USA Instrument: TC600 Series Introduction The determination of oxygen in lead is an important quality control procedure for lead and lead alloy producers. The amount of oxygen present is…