Halogenated hydrocarbons - Separation of CFCs on a bonded porous polymer

Halogenated hydrocarbons Separation of CFCs Application Note Environmental Authors Introduction Agilent Technologies, Inc. Alumina PLOT columns have a specific selectivity for CFCs. Not fully halogenated CFCs can show some adsorption and degradation at low concentration levels. In that case a…

Halogenated hydrocarbons, C1 – C2, hydrocarbons. C1 – C6 Application Note Environmental Authors Introduction Agilent Technologies, Inc. Porous polymers are generally preferred for CFC separations as the high retention allows the volatile CFCs to be measured at low levels. However,…

Halogenated hydrocarbons, C1 – C2 Separation of CFCs Application Note Environmental Authors Introduction Agilent Technologies, Inc. The silica adsorbent of Agilent CP-SilicaPLOT combines a high retention with a high inertness for halogenated hydrocarbons. Together with the low bleed, stability of…

000_PIN_APRIL_11:Layout 1 0 4/4/11 15:44 Page 2 Analytical Instrumentation New Alumina Column Shows Promise for Analysing Chlorofluorocarbons Jaap de Zeeuw* and Tom Vezza Restek Corporation, 110 Benner Circle, Bellefonte, PA, US * Restek Corporation, Weerhaan 9, Middelburg, The Netherlands A…