Replacement Chemical Trap for Agilent GCs: 5880

EZ Twist Top™ Split/Spitless Injection Ports For Agilent 6890/6850 GCs cat.# 22721, 22722, 22733, 22734, 22735, 22736 septum nut Figure 1 split vent gas line weldment shell weldment gas lines Figure 2 Figure 3 Dual Vespel® Ring Inlet Seal reducing…

EZ Twist Top™ Split/Splitless Injection Ports For Agilent 7890 GCs cat.# 22175, 22176, 22177, 22178 Before Starting: 1. Turn off the main power to the instrument and unplug the power cord from the receptacle. Allow adequate time for the instrument’s…

Installation Instructions for 5mm Uniliner® Inlet Liner with Adaptor in 1/4-inch Injection Port (1/4-inch Inlet Liner Adaptor–cat.# 20310, 20311; 1/4-inch Siltek® Inlet Liner Adaptor–cat.# 22282) Overview Convert a 1/4-inch packed column injection port to accept a 0.32 or 0.53mm ID…

Restek MSD Conversion Fitting (cat.# 21314) This MSD Conversion Fitting is used to convert your source fittings for use with standard nuts and ferrules. This design uses Vespel® /graphite ferrules and inexpensive 1/16-inch nuts instead of the costly instrument manufacturers…