Restek GC Carrier Gas Management System

Capillary-Grade Hydrocarbon Trap /8-inch tube compression fittings–cat.# 21991 /4-inch tube compression fittings–cat.# 21992 Capillary-Grade Hydrocarbon Trap /8-inch tube compression fittings–cat.# 21991 /4-inch tube compression fittings–cat.# 21992 1 1 1 1 Maximum Operating Pressure: 250 psi Maximum Operating Temperature: 100 °C…

Installation Instructions for 5mm Uniliner® Inlet Liner with Adaptor in 1/4-inch Injection Port (1/4-inch Inlet Liner Adaptor–cat.# 20310, 20311; 1/4-inch Siltek® Inlet Liner Adaptor–cat.# 22282) Overview Convert a 1/4-inch packed column injection port to accept a 0.32 or 0.53mm ID…

Installing a Uniliner® Liner without an Adaptor in a Standard Packed Column Injection Port Overview These instructions are to be used ONLY if an adaptor cannot be used. A stainless steel Reducing Kit (cat.# 20312) or a reducing ferrule should…

High Capacity Moisture Trap /8-inch tube compression fittings—cat.# 21997 /4-inch tube compression fittings—cat.# 20638 High Capacity Moisture Trap /8-inch tube compression fittings—cat.# 21997 /4-inch tube compression fittings—cat.# 20638 1 1 1 1 Maximum Operating Pressure: 250 psi Maximum Operating Temperature:…