Analysis of copper alloys

Application note | 41426 X-ray fluorescence Analysis of copper alloys with ARL X900 XRF Spectrometer and its goniometer Goal Describe the analytical performance of Thermo Scientific™ ARL™ X900 Series Spectrometer for copper alloys analysis using the Moiré fringe goniometer. A…

Application note Analysis of nickel ore with the ARL OPTIM’X WDXRF Spectrometer Introduction Analytical conditions Nickel is produced from two very different ores: lateritic and As shown in Table 1, spectra were collected from each nickel sulfidic. Lateritic ore is…

Application note | AN41427 X-ray fluorescence Analysis of copper alloys with the ARL X900 XRF Spectrometer Keywords Goal Describe the analytical performance of Thermo Scientific™ ARL™ X900 Series ARL X900, X-ray fluorescence, XRF, Spectrometer for copper alloys analysis using fixed…

APPLICATION NOTE ARL 9900 Series with IntelliPower Simultaneous-Sequential XRF Spectrometer Key words ARL 9900, brass, bronze, copper, XRF Copper alloys Pure copper is mixed with other elements to produce a wide range of alloys: • Brasses (Cu-Zn) • Bronzes (Cu-Sn)…