Carbon Determination in Tungsten Carbide

Determination of Carbon and Sulfur in Tungsten Carbide LECO Corporation; Saint Joseph, Michigan USA Instrument: CS844 Series Introduction Sample Preparation Samples should be crushed to a uniform powder prior to analysis. Accessories 528-018 or 528-018HP Crucible; 502-492 Copper; 502-231 Iron…

® Carbon and Sulfur Determination in High Carbon Ferroalloys LECO Corporation; Saint Joseph, Michigan USA Instrument: CS230/CS600 Ferroalloys are alloys of iron that contain a high level of one or more other primary elements. The principle ferroalloys consist of silicon,…

® Carbon and Sulfur Determination in Low Carbon Ferroalloys LECO Corporation; Saint Joseph, Michigan USA Instrument: CS230/CS600 Introduction Calibration NIST, BCS, IARM, LECO, or other suitable reference materials. Method Parameters Purge Time (seconds) Delay Time (seconds) 10 25 Carbon Minimum…

® Carbon in Refractory and Reactive Metals † and Their Alloys LECO Corporation; Saint Joseph, Michigan USA Instrument: CS600 Sampling and Sample Preparation Method Reference ASTM E1941 Accessories 528-018 or 528-018HP Ceramic Crucibles and 619-880 Ceramic Crucible Covers (preheated)*; 502-492…