Characterization of Polymers by Multi-Step Thermal Desorption/Programmed Pyrolysis Gas Chromatography Using a High Temperature PTV Injector

Application Note No. 025 Combined Thermal-Desorption and Pyrolysis GC Using a PTV Injector. Part II: Polymer Characterization. Mark van Lieshout*¹, Hans-Gerd Janssen¹, Carel Cramers¹, Martin J.J.Hetem² and Huub J.P. Schalk² 1. 2. Laboratory of Instrumental Analysis, Eindhoven University of Technology,…

Material Characterization in the Automotive Industry Using Multi-Mode Pyrolysis GC/MS: A COMPREHENSIVE GUIDE FOR PYROLYSIS GCMS TECHNIQUE AND ITS USE IN THE AUTOMOTIVE INDUSTRY Table of Contents Why Pyrolysis GC/MS? 1 Analytical Problems & Pyrolysis-Based Solutions 2 Polymer Processing 4…

Application Note No. 024 Combined Thermal-Desorption and Pyrolysis GC Using a PTV Injector. Part I: Theory and Practicle Aspects Mark van Lieshout*, Hans-Gerd Janssen and Carel Cramers, Laboratory of Instrumental Analysis, Eindhoven University of Technology, P.O. Box 513, 5600 MB…

Rubber and Plastic Materials Characterization Using Micro-Furnace Multi-Mode Pyrolysis-GC/MS 1 Copyright © 2020 Frontier Laboratories Ltd. Why Pyrolysis-GC/MS? Manufacturers are always seeking new technologies and developments that increase production efficiency and the quality of the produced parts. Many analytical protocols…