Intrinsic viscosity (IV) determination of recycled PET by NIR spectroscopy

Aplikace | 2023 | MetrohmInstrumentace
NIR Spektroskopie
Zaměření
Průmysl a chemie
Výrobce
Metrohm

Importance of the Topic


Recycled PET quality control relies on accurate intrinsic viscosity (IV) measurements to ensure polymer performance in downstream applications. Traditional glass capillary viscometry methods require hours of sample drying, use of solvents, and elaborate lab procedures.

Objectives and Study Overview


This application note demonstrates the development of a rapid, chemical-free VIS–NIR spectroscopic method for predicting the intrinsic viscosity of recycled PET (rPET) using the Metrohm DS2500 Solid Analyzer. The goal was to achieve sub-minute analysis without sample pretreatment and to validate the approach against the ASTM D4603 reference method.

Methodology and Instrumentation


Measurements were performed on 48 rPET samples with varying IV values. Key experimental details include:
  • Metrohm DS2500 Solid Analyzer operating in the 400–2500 nm range
  • Large sample cup to rotate and average spectra, mitigating particle size effects
  • Reference IV determination by glass capillary viscometer following ASTM D4603 (including 2–3 h drying and dissolution)
  • Vision Air Complete software for spectral acquisition, calibration, and prediction model development

Main Results and Discussion


The VIS–NIR calibration model achieved an R2 of 0.9061 versus reference viscosities. Figures of merit were:
  • Standard Error of Calibration (SEC): 0.0068 dL/g
  • Standard Error of Cross-Validation (SECV): 0.0084 dL/g

Correlation plots indicated excellent agreement between predicted and laboratory values, confirming the method’s robustness for routine analysis.

Benefits and Practical Applications


Compared to conventional viscometry, the VIS–NIR approach offers:
  • Results in less than one minute without any chemical reagents or sample drying
  • Elimination of hazardous solvents, improving lab safety and reducing waste
  • Capability to extend calibrations for additional rPET parameters such as diethylene glycol and isophthalic acid

Future Trends and Potential Applications


Further developments may include:
  • Expansion of spectral libraries for multi-component quantification in recycled polymers
  • Integration of VIS–NIR modules into production lines for real-time IV monitoring and process control
  • Automation with sampling robots and inline probes for high-throughput quality assurance

Conclusion


The Metrohm DS2500 Solid Analyzer combined with VIS–NIR spectroscopy provides a fast, accurate, and solvent-free alternative for intrinsic viscosity determination in rPET, streamlining QC workflows and enhancing laboratory safety.

References

Obsah byl automaticky vytvořen z originálního PDF dokumentu pomocí AI a může obsahovat nepřesnosti.

PDF verze ke stažení a čtení
 

Podobná PDF

Quality Control of PET
Quality Control of PET
2020|Metrohm|Aplikace
Quality Control of Polyamides
Quality Control of Polyamides
2020|Metrohm|Aplikace
Quantification of cotton content in textiles by near-infrared spectroscopy
Quality Control of Silicone rubber